| 1 to 2 Splitter|
This product completely splits HDMI signal from 1 source to 2 different outputs. It could, for example, split the
signal from your HD DVD player to play on your HDTV and your HD Projector at the same time.
| 3D Support|
This product fully supports passage of 3D signals. This means you can use this HDMI device in your
3D entertainment system with no hassles.
| Full 1080p HD|
This product passes the highest standard quality of HD devices, full 1080p HD. 1080p refers to the amount of
pixels in the image. Widescreen ratio of 16:9 with a resolution 1,920 pixels wide and 1,080 pixels high.
The Conversions Technology CTHDMI-S2 is a distribution amplifier splitter that distributes the HDMI input into two identical outputs. The synchronized outputs also have the ability of buffering and amplifying. Each unit’s output can achieve long distance transmission of HDMI signal up to 50-feet. When two or more 1 x 2 splitters are cascaded, they can be used to create a larger distribution and longer length.
View Product Sheet:
Due to the current state of the technology, results using HDMI and/or DVI splitters can be mixed. Especially splitters which reply on the individual device's ability to negotiate a 3 way "handshake". The problem is that not all devices are programmed to deal with this properly and will sometimes default to an HDCP error state. To put it simply, some devices will consider a split of the signal to be a copyright violation, so it may decide that only one display should show at a time or may block the content entirely. This type of situation is considered to be a device compatibility issue and cannot be fixed short of a firmware update by the individual device manufacturers.